We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Remo Kick Drum Heads: How to Choose the Right One for Your Kit (2026)

Learn how to choose remo kick drum heads by coating, ply, port and size, with steps, tuning tips and common mistakes to avoid for a tighter bass drum.

Updated November 2026

Remo kick drum heads come in several families, and the right one depends on the sound you want, how hard you play and whether you need a port or a muffling ring. This guide walks you through the decisions that matter most, from picking the head type to setting a starting tension, so you can get a punchy, controlled bass drum without guesswork.

Step 1: Pick the Head Type That Fits Your Playing

Remo makes bass drum heads in both coated and clear versions, and each responds differently. Coated heads, such as the Powerstroke and Ambassador lines, have a slightly warmer tone and a bit more attack resistance. Clear heads, including the Powerstroke 3 and Ambassador Clear, sound brighter and project more, which many drummers prefer for rock and metal.

Shopping for one? See our guide: Remo Drum Heads Ambassador: 5 Best Picks for Every Drummer (2026).

If you play mostly jazz or light pop, a thinner, more responsive head will suit you. If you hit hard or play heavy genres, look at a thicker front head with a reinforced or pillow-style construction.

Step 2: Decide on a Port Hole or Solid Head

A ported front head lets air escape, which reduces the boom and gives you a tighter, more controlled sound. Remo offers several ported and unported options, and the choice comes down to how much resonance you want. A solid front head rings longer and gives you a bigger, more open tone, but it can sound boomy in a small room.

Many drummers pair a ported batter head with a resonant head on the back. If you use a pillow or internal muffling, you can often keep the front head solid and still control the low end.

Step 3: Match the Head Size to Your Drum

Bass drum heads come in standard sizes that match common shell diameters. Check the nominal diameter stamped on your drum or listed in your kit specs before ordering. Common sizes include 18″, 20″, 22″ and 24″, and a mismatch will cause fitment problems or uneven tension.

For a quick check, measure the inside of the hoop or the bearing edge of your shell. If you are unsure, the drum’s original spec sheet is the most reliable reference.

Step 4: Set the Starting Tension and Tune

Once the head is on, tighten the lugs in a star pattern to seat the hoop evenly. Bring each lug up to a light, even snugness first, then add a quarter turn at a time until the head sounds clear. Keep the tension moderate. Overtightening a bass drum head often produces a choked, plasticky tone and can stress the hoop.

  1. Mount the head and hoop, then hand-tighten all lugs.
  2. Tighten in a star pattern, one quarter turn per pass.
  3. Tap near each lug and match the pitch around the head.
  4. Play at your normal dynamic and adjust until the tone opens up without buzzing.

A drum key with a comfortable grip makes even tensioning easier across all lugs, so you can tune by feel rather than fighting the hardware. View on Amazon

A small bass drum muffler or a folded blanket placed inside the shell can tame ring without changing the head, which is useful when you want to try a solid front head in a close room. View on Amazon

A tuning or head-replacement guide keeps you on track when swapping heads, especially if you are new to working with hoops and bearing edges. View on Amazon

Common mistakes

  • Choosing a head size based on the drum’s visual size instead of its nominal diameter.
  • Tightening lugs one at a time in a circle, which pulls the hoop out of alignment.
  • Cranking the tension to get more attack, which usually makes the drum sound choked.
  • Using a solid front head in a small room without any internal damping.
  • Skipping a retune after the first week, since new heads tend to stretch.

If you want more background on how these heads differ, our guide to Remo Resonant Drum Heads: How to Choose the Right Pair (2026) covers resonant head pairing in detail, and Custom Kick Drum Heads: A Step-by-Step Guide to Choosing Yours explains how to match a head to your shell.

FAQ

Do I need a ported head on my kick drum?

Not always. A ported head reduces boom and gives a tighter sound, but a solid head with internal muffling can work just as well. Try both if your room is small or very live.

How do I know which size remo kick drum heads to buy?

Check the nominal diameter of your bass drum, which is usually listed on the shell or in the manufacturer’s specs. Match that number exactly when ordering.

How often should I retune my bass drum heads?

Retune after the first few sessions on a new head, since it stretches as it settles. After that, check tension whenever the sound drifts or after changing venues.

Conclusion

To choose the right remo kick drum heads, start with the head type, decide whether you want a port, and confirm the correct diameter. Tune in a star pattern to a moderate tension, then adjust by ear. With those steps, your bass drum should sound tighter and more controlled in any room.

Owen Palmer

About Owen Palmer

Owen Palmer is part of our editorial team and reviews and edits our drums guides, checking product details against manufacturer specifications and owner feedback.

About the author

Owen Palmer
Owen Palmer

Owen Palmer writes reviews and buying guides for Drum Path.