We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Double Beat Bass Drum Pedal?

Answers to common double bass drum pedal questions: how the two-pedal setup works, what to check on setup, and fixes for uneven kicks and beaters.

Updated November 2026

A double bass drum pedal lets one drummer play two bass drums with two separate foot pedals, one per kick. Each pedal has its own beater, and the two pedals are usually linked to the same drum or to a pair of drums. This setup gives you fast, doubled kick patterns without needing a second drummer or an extra limb. Most questions about the double bass drum pedal come down to how it’s set up and how it feels under your feet.

Why Does a Double Bass Drum Pedal Feel Uneven?

The most common complaint is that one foot feels stronger or faster than the other. That usually traces back to small differences in the two pedals rather than any flaw in your technique. Check these first:

Shopping for one? See our guide: 5 Best Electronic Drum Double Bass Pedal Options for Practice and Gigging (2026).

  • Spring tension: Mismatched springs make one pedal return faster and resist more than the other.
  • Beater height and angle: A beater that sits too high or angles away from the head adds travel time.
  • Footboard and chain alignment: A chain or strap that isn’t square pulls the beater off center.
  • Pedal height and spacing: If the footboards sit at different heights, your feet will fatigue unevenly.

Setup Factors That Affect Feel and Consistency

Start with the beater-to-head distance. Many drummers set the beater so it rests about a few millimeters from the head at rest, which leaves room for a clean rebound without a long travel path. Adjust both beaters to the same distance and check that they strike the center of each head. Next, match the spring tension on both pedals so the return speed feels identical. Finally, confirm that each footboard sits level and at a comfortable angle relative to your throne height. Manufacturers typically include setup guidance in the manual, and it’s worth following their recommended settings before you start tweaking.

Practical Steps to Even Out Your Double Pedal

  1. Loosen all tension on both pedals, then reset the spring tension to the same position on each.
  2. Set the beater distance on both pedals to match, then tighten the locking screws firmly.
  3. Play slow single strokes with each foot alone, listening for any change in volume or speed.
  4. Alternate feet at a slow tempo, gradually increasing speed while keeping both kicks even.
  5. Recheck the setup after a few sessions, since hardware can loosen over time.

If your pedal feels unfamiliar or you’re unsure how to adjust the spring tension, consider asking a local drum shop technician to walk you through the setup.

What We’d Use

A solid option for most beginners is the Pearl P-932 Double Bass Drum Pedal, a widely used model that many players start with. View on Amazon

For drummers who want a smoother, more customizable feel, the Tama Speed Cobra HP910 double pedal is a common choice among gigging players. View on Amazon

If you’re still deciding which setup suits your playing, you may find How to Play Double Bass Drum Pedal: A Step-by-Step Guide for Beginners and Double Bass Drum Pedal Setup: A Step-by-Step Guide for Beginners useful. For used gear, Used Double Bass Drum Pedal: What to Check Before You Buy covers the common wear points to inspect.

FAQ

Can I use a double bass drum pedal on a single kick drum?

Yes. You can mount both pedals to one bass drum and use one beater for each foot, or set the second pedal to strike the same head for a doubled sound. Many players do this to get faster patterns without adding a second drum.

How often should I adjust a double bass drum pedal?

Check the setup every few sessions, especially when you’re getting used to the pedals. Loose hardware and shifting springs are common causes of uneven feel, so a quick check helps keep both kicks consistent.

Why does my double pedal wear out faster than a single pedal?

Two pedals mean twice the moving parts, so chains, springs and beater bearings take more stress over time. Regular cleaning, lubrication as the manufacturer recommends, and periodic tightening of hardware help extend the life of both pedals.

Audrey Hayes

About Audrey Hayes

Audrey Hayes is part of our editorial team and reviews and edits our drums guides, checking product details against manufacturer specifications and owner feedback.

About the author

Audrey Hayes
Audrey Hayes

Audrey Hayes writes reviews and buying guides for Drum Path.