How to Build a Double Bass Pedal: A Step-by-Step Guide for Drummers
Learn how to build a double bass pedal from a parts list, with steps for assembly, alignment and tuning so your second kick pedal feels solid and responsive.
Updated November 2026
Building a double bass pedal means joining two kick pedal footboards, cams, beaters and linkage into one working unit that lets you play two bass drums with one foot each. This guide walks you through how to build a double bass pedal from a set of compatible parts, how to align the two halves, and how to tune the result so it feels consistent. Expect a project that takes a careful afternoon, with most of the real work in alignment.
Gather the Right Parts and Tools
Start with two single bass drum pedals that share the same design, because mixing brands rarely produces a stable result. Many builders use a single-pedal chain drive for the first footboard and a second chain drive for the second, linked through a shared spring tension system. Check that both pedals use compatible beater heads, cam shapes and footboard widths before you begin.
Shopping for one? See our guide: 5 Best Electronic Drum Double Bass Pedal Options for Practice and Gigging (2026).
- Two matching single bass drum pedals, with spare beater heads
- A hex key set and a combination wrench set
- A pedal shaft or bar that fits your frame, if you plan to link the footboards
- Thread locker for metal-to-metal fasteners
- A tape measure or caliper and a small level
- A soft mat to protect the floor and your work surface
Step-by-Step Assembly
Step 1: Mount the Two Footboards
Position the two pedals side by side on a flat surface, leaving about 2 to 3 inches between the footboards so your feet have room. Bolt both bases to a shared rail or frame plate so the pedals cannot drift apart during play. Keep the footboards parallel, and confirm the heel-to-toe travel is identical on each side.
Step 2: Link the Drive Mechanisms
Connect the second pedal’s drive to the first using a shared shaft or linkage bar. The goal is that each beater strikes its head at the same moment and with the same force when you press either footboard. Tighten all connections gradually, and recheck alignment after each turn of the wrench.
Align, Tune and Test the Pedal
Alignment decides whether the double pedal feels natural or frustrating. Set the beater height so each beater rests about 1/8 inch from its batter head at rest, then adjust the spring tension until both beaters return at the same speed. Test the pedal by playing slow single strokes with each foot, then move to double strokes at a steady tempo.
- Set the beater-to-head distance to roughly 1/8 inch on both pedals.
- Match spring tension so both footboards rebound with similar resistance.
- Check that the footboards sit level and the linkage moves freely.
- Play slow, then fast, and listen for uneven strikes.
Common Mistakes to Avoid
- Mixing pedal brands or models with different cam profiles, which makes tuning nearly impossible.
- Skipping thread locker, so bolts loosen during play and the setup drifts.
- Setting the beaters too far from the heads, which slows your response.
- Tightening the spring too much, which causes fatigue and reduces control.
- Ignoring footboard spacing, which leads to cramped foot movement.
Recommended Gear
Matching single pedals are the foundation of any homemade double setup, and a well-made single kick pedal with adjustable tension is a sensible starting point. A quality set of hex keys helps you reach the small fasteners on both units without stripping them. Thread locker, used sparingly on metal joints, keeps the linkage from loosening after a few sessions.
- A matched single bass drum pedal with adjustable spring tension: View on Amazon
- A metric hex key set for pedal hardware: View on Amazon
- Medium-strength thread locker for drum pedal bolts: View on Amazon
FAQ
Can I build a double bass pedal from two single pedals?
Yes, provided both pedals are the same design and you link them with a shared frame and shaft. Matching hardware makes alignment far easier.
How long does it take to build one?
Most builders finish the assembly in an afternoon, but tuning the beater height and spring tension can take several additional sessions.
Should I consult a professional before building one?
If you are unsure about tightening hardware or handling spring tension, a qualified drum technician can check your work. Loose or over-tensioned parts can cause injury or damage the pedal.
Conclusion
A homemade double bass pedal rewards patience, careful alignment and matched parts. Build it on a stable frame, set the beater distance and spring tension evenly, and test thoroughly before you play a full set. Once the two halves move in unison, you have a working double pedal that fits your feet and your playing.
Related reading
- How to Set Up Double Bass Pedal: A Step-by-Step Guide for Beginners
- How to Position Double Bass Pedal: Setup Steps for Comfortable Playing
- How to Play Double Bass Drum Pedal: A Step-by-Step Guide for Beginners
- How to Adjust a Double Bass Pedal: A Step-by-Step Guide for Drummers
- How Does a Double Bass Pedal Work? A Step-by-Step Guide for Drummers
- Double Double Bass Pedal: How It Works and How to Set One Up
Ready to choose one?
