Peter Erskine Drum Heads: What He Uses and How to Get Close to His Sound
Peter Erskine drum heads explained: the head types jazz drummers often choose, how tuning shapes his warm, articulate sound, and how to copy it.
Updated November 2026
Peter Erskine drum heads are a common starting point for drummers who want the open, articulate, jazz-leaning tone associated with his playing. This guide explains the kinds of heads that support that sound, how to tune them, and where a beginner should begin. You will leave with a clear plan for choosing and setting up heads that favor clarity, sensitivity and sustain over sheer volume.
Understand the Sound You Are Chasing
Erskine’s playing is known for clear note definition, soft-to-medium dynamics and a snare that speaks without a hard, cutting crack. Achieving that starts with thinner, single-ply or lightly coated batter heads rather than thick, heavily dampened ones. Owners of similar jazz kits often report that lighter heads respond faster to brush and stick touch, which is the core of that style.
Shopping for one? See our guide: Remo Drum Heads Ambassador: 5 Best Picks for Every Drummer (2026).
Choose Batter and Resonant Heads
For toms, a clear or lightly coated batter head with a thin resonant head tends to produce the open, singing tone associated with this approach. Snare batter heads with a light coating or a thin two-ply construction give a controlled attack. Resonant heads should be thin enough to let the drum ring, but not so loose that they blur the pitch of each hit.
Tune for Clarity and Articulation
Tuning is where most of the sound is shaped. Use the following steps:
- Bring each head up to finger-tight, then turn each lug the same amount using a drum key.
- Tap about an inch from each lug and aim for matching pitch around the head.
- Tune the batter a little lower than the resonant head on toms for a warmer, more resonant tone.
- Tune the snare batter tight enough to respond crisply to brushes and sticks, but not so tight that it chokes.
- Play at low volume and listen for overtones, then make small adjustments of a quarter turn at a time.
Match Heads to Your Kit and Room
A thin head on a large bass drum can sound boomy and unfocused, so many drummers pair a single-ply or lightly muffled kick head with a clear batter. Smaller kits and jazz rooms usually suit thin heads well, while louder rooms may call for slightly heavier construction. Keep your choice consistent across the kit so the drums blend.
Checklist before you buy
- Your drum sizes and whether the heads are for toms, snare or kick
- Your preferred feel: light and open or controlled and punchy
- Whether you need muffling or can play with an open sound
- Your room size and typical volume
Recommended gear
A drum key and a tuning gauge make it far easier to set the matching pitch described above. Keep a spare set of batter heads so you can compare sound changes without committing to one setup.
- Drum key with a comfortable grip lets you make even quarter-turn adjustments at each lug. View on Amazon
- Drum tuning gauge helps you match tension across the head so pitch stays consistent. View on Amazon
- Replacement drum heads in your chosen size let you test lighter and thinner options without disturbing the rest of your kit. View on Amazon
Common mistakes
- Tuning both heads to the same high tension, which can make the drum sound choked.
- Over-tightening the snare batter, which reduces the sensitivity jazz players rely on.
- Ignoring the bass drum head, which can overpower the rest of the kit if too thin and loose.
- Changing several variables at once, which makes it hard to tell what improved the sound.
For a broader look at how head choice affects tone, see What Are Drum Heads Made Of? Materials Explained for Beginners and Remo Drum Heads Explained: How to Pick, Tune and Care for Yours. If you are new to adjusting drums, How to Tune Drum Heads: A Step-by-Step Guide for Beginners covers the basics in more detail.
FAQ
Do I need the exact same heads to get a similar sound?
No. The tuning approach and the drum’s shell, size and room matter as much as the head model. Starting with thin, clear batter heads and tuning carefully will get you closer than copying brand names alone.
Should I use the same heads on every drum?
Not necessarily. Bass drums often need a different head than toms or snare, because their larger size and role in the kit call for different tension and damping.
How often should I replace these heads?
Replace them when they lose their attack, develop dents or dead spots, or when tuning no longer holds. Heavy gigging speeds this up, so check them regularly.
Conclusion
Peter Erskine drum heads are best understood as a sound goal: thin, articulate, responsive heads tuned for clarity. Start with lighter batter heads, tune carefully in small steps, and match the setup to your room. Adjust one thing at a time, and your kit will move closer to that open, singing jazz tone.
Ready to choose one?
