We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Steve Jordan Drum Heads: What He Uses and How to Get His Sound

Learn which steve jordan drum heads are typically associated with his session sound, how to match his tone, and which head types to try for your own kit.

Updated November 2026

Steve Jordan is a session and touring drummer whose work spans pop, funk and rock, and his sound is built on a tight, punchy attack with controlled sustain. Public accounts of his setup point toward clear, single-ply batter heads on the toms and snare, paired with a conventional resonant head, rather than heavily muffled or thick coated heads. If you want to chase that sound, start with a clear batter, tune to medium-high tension, and adjust from there.

Why Steve Jordan’s Sound Comes From the Heads

Heads shape three things: attack, sustain and overtone content. A thin, clear batter responds quickly to the stick and gives a focused crack, which suits the tight backbeat style associated with session work. Heavier or coated heads add weight and warmth but reduce articulation, which can blur the fast ghost notes and hi-hat-driven grooves common in funk and pop. Because most of his recorded and live sound is defined by precision, the heads are usually chosen to keep the attack crisp.

Shopping for one? See our guide: Remo Drum Heads Ambassador: 5 Best Picks for Every Drummer (2026).

Note that drummers who work closely with a particular player rarely share a complete, verified spec sheet, so treat any specific model as a starting point rather than a confirmed fact. Focus on the characteristics instead: clarity, fast response and moderate sustain.

Factors That Affect Your Version of the Sound

Matching the feel depends on several variables, and the head is only one of them:

  • Batter thickness. Single-ply clear heads are the most common choice for an articulate tone. Two-ply heads add durability and a fuller low end.
  • Tension. Higher tension increases pitch and attack. Lower tension gives a fatter, longer tone. For a tight pop-rock sound, most drummers tune the batter noticeably higher than the resonant head.
  • Reso head. A thin, clear reso keeps the drum open. A reso with a small hole or dot can add a bit of controlled tone shaping.
  • Drum shell and size. Head choice interacts with shell material and depth. A 14-inch snare and a 12-inch rack tom will respond differently to the same head.

How to Dial In a Similar Sound

  1. Start with a single-ply clear batter on the snare and toms.
  2. Pair it with a clear or lightly treated resonant head.
  3. Tune the batter to medium-high tension, then tune the reso slightly lower.
  4. Tap the head at 2 to 3 inches from the rim and check that the overtones are even around the drum.
  5. Play the groove you care about at both loud and soft dynamics, and adjust tension in small quarter-turn steps until the attack and sustain feel right.
  6. Re-check tuning after a few sessions, since new heads stretch in the first days of use.

What We’d Use

For a clear, articulate batter that suits a session-style sound, a single-ply head from Remo’s Ambassador line is a sensible starting point, and you can read more in our Remo Ambassador Clear Drum Heads Review: Features and Performance. For a matching resonant head, a clear reso such as the Evans G1 Clear keeps the drum open and responsive. View on Amazon View on Amazon

FAQ

Did Steve Jordan use a specific brand of drum heads?

Drummers in his position often change gear over time, and detailed head specifications are not always published. Treat any brand as a reference point and focus on the clear, articulate character that defines his sound.

Should I use single-ply or two-ply heads for this style?

Single-ply heads usually give more attack and clarity, which suits tight pop and funk grooves. Two-ply heads are more durable and add some warmth, so choose them if you play harder or gig often.

How do I know when to replace heads?

Replace a head when it has visible dents, dead spots, or no longer holds tuning. Consult a drum technician if you are unsure whether a head is damaged beyond repair.

Owen Palmer

About Owen Palmer

Owen Palmer is part of our editorial team and reviews and edits our drums guides, checking product details against manufacturer specifications and owner feedback.

About the author

Owen Palmer
Owen Palmer

Owen Palmer writes reviews and buying guides for Drum Path.