We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

How Does a Double Bass Drum Pedal Work? A Step-by-Step Guide

Learn how does a double bass drum pedal work: the linkage, the shared footboard, and how two beaters strike the kick heads. A clear guide for drummers.

Updated November 2026

A double bass drum pedal lets one drummer strike two bass drums, or one bass drum twice, using a single footboard for each beater. In short, it works through a linkage that transfers your foot’s motion into a beater arm, with a second, mirrored assembly driving the other beater. Once you understand the mechanism, setup and technique become much easier to control.

The Basic Mechanism Behind a Double Pedal

A double pedal is two standard bass drum pedals joined on a single baseplate. Each side has its own footboard, beater, spring and cam. A shared drive shaft or linkage connects the two sides so they can be played from one set of foot movements, or operated independently on some models. The beater on each side pivots on a hinge, and the strike happens when the footboard pushes the beater forward against the drum head.

Shopping for one? See our guide: 5 Best Electronic Drum Double Bass Pedal Options for Practice and Gigging (2026).

How the Footboard, Linkage and Beater Work Together

When your heel presses down, the footboard rotates around its axle and pulls the chain or strap attached to the cam. The cam converts that pull into the beater’s forward swing. A spring returns the beater and footboard after each stroke. On a double pedal, the second footboard is typically mounted in line with the first, so you can alternate feet or play both with one foot, depending on your technique.

Key Components to Know

  • Footboard: the platform your foot presses on.
  • Chain or strap: carries motion from the footboard to the cam.
  • Cam: a wheel-shaped part that changes the stroke’s leverage and speed.
  • Beater: the striking head, often felt, plastic or wood.
  • Spring: returns the beater to its rest position.

Steps to Understand and Check Your Double Pedal

You can learn how your pedal behaves with a few simple checks before you play a full kit.

  1. Sit at your throne with the pedal positioned in front of the kick drum, and press the first footboard slowly. Watch how the beater travels toward the head.
  2. Press the second footboard and compare the stroke. The two sides should feel similar.
  3. Note the beater’s rest distance from the head. Manufacturers usually specify an adjustable gap, so check that the beater returns cleanly without touching the head at rest.
  4. Adjust the spring tension until the return feels controlled but not sluggish.
  5. Play single strokes, then doubles, to confirm both sides respond evenly.
Component What It Controls
Cam shape Stroke speed and power
Spring tension Return speed and rebound
Beater height Contact point and tone
Linkage length Footboard feel and travel

Common Mistakes to Avoid

  • Setting the beaters too close to the head, which causes rattling or choked strokes.
  • Over-tightening the springs, which tires your foot and slows rebound.
  • Ignoring hardware alignment, which makes one side feel stiffer than the other.
  • Assuming both footboards must always move together. Many pedals allow independent use.

A quality double pedal with adjustable cams gives you the most control over stroke feel. Look for a model with a sturdy baseplate, since flex in the frame shows up as inconsistent rebound. View on Amazon

A practice pad with a rebound surface helps you train your feet before you commit to a full kit setup. View on Amazon

FAQ

Can you use a double bass pedal on a single kick drum?

Yes. Many drummers use one kick drum with two beaters, which allows fast double strokes on a single head. The technique is common in metal and rock playing.

Do both footboards need to be the same height?

They should be close for consistent feel. Manufacturers generally recommend matching the footboard and beater settings on both sides.

Is a double pedal harder to learn than a single pedal?

It takes more coordination, but the mechanism itself is straightforward. Practice slow alternating strokes before increasing speed.

Conclusion

A double bass drum pedal works by linking two footboards, cams and beaters so each foot can drive its own strike. Once you know how the spring, cam and beater interact, you can adjust the pedal for speed, power and comfort. Take time with setup, and your double strokes will feel far more even.

Audrey Hayes

About Audrey Hayes

Audrey Hayes is part of our editorial team and reviews and edits our drums guides, checking product details against manufacturer specifications and owner feedback.

About the author

Audrey Hayes
Audrey Hayes

Audrey Hayes writes reviews and buying guides for Drum Path.