We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

How to Adjust Double Bass Drum Pedal: 6 Steps for Smooth, Even Strokes

Learn how to adjust double bass drum pedal settings, including spring tension, beater height, footboard angle and cam position, for faster, even strokes.

Updated November 2026

Learning how to adjust double bass drum pedal settings lets you tune the feel of each stroke to your foot, your shoe and your playing style. In this guide, you will set spring tension, beater height, footboard angle and the drive system so both pedals respond evenly. Most adjustments take less than 20 minutes once you know which knob does what.

Before You Start: Tools and Setup Basics

Work with the pedals on a stable rug or carpet so the footplates do not slide. Keep your drum throne at the height you normally play, because pedal settings change when your ankle angle changes. You will need:

Shopping for one? See our guide: 5 Best Electronic Drum Double Bass Pedal Options for Practice and Gigging (2026).

  • A hex or Allen key set (most pedals use 4 mm, 5 mm and 6 mm sizes)
  • A flathead screwdriver for spring tension adjustments on some models
  • A pencil or painter’s tape to mark original settings
  • A metronome for checking even rebound

Mark each original position before you change anything. That gives you a reset point if a setting feels wrong.

Adjust Spring Tension and Beater Height

Spring tension controls how quickly the beater returns after a stroke. Most double pedals use a spring tension knob or a clamp near the cam or the spring post. Turn the adjuster clockwise to increase tension for a faster, firmer return, or counterclockwise to loosen it for a softer feel.

Beater height determines how far the beater travels before striking the head. Adjust it so the beater sits about 1 to 2 inches above the batter head at rest. Too close and you lose power; too far and you lose speed.

Quick check for spring tension

  1. Press the footboard slowly and feel the resistance.
  2. Release and watch the beater return.
  3. Play single strokes at a moderate tempo, then increase the speed in small steps.

Set the Footboard Angle and Cam Position

The footboard angle affects how your heel and toe engage with the pedal. Many players set the footboard so the top of the footplate sits roughly level with the heel when the foot rests naturally. Loosen the angle clamp, adjust, and retighten.

The cam shape changes the stroke’s acceleration curve. A round cam gives a steady, even feel, while a more eccentric cam can add power at the start of the stroke. If your pedal offers cam position options, try moving it one notch at a time and check the rebound on both pedals.

Match the Two Pedals for Even Strokes

Double pedals rarely match perfectly out of the box. Compare the left and right pedals with a simple test: play alternating single strokes at 100 beats per minute, then 120, then 140. If one pedal feels heavier or returns more slowly, adjust the spring tension, beater height or chain tension on that side until the strokes sound and feel the same.

Check the chain or strap tension as well. A chain that is too tight binds the drive, and one that is too loose causes lag. Most manufacturers recommend a small amount of slack, so the chain moves freely without slapping.

Common Mistakes

  • Changing several settings at once, which makes it hard to know what helped.
  • Setting the beater too close to the head, which reduces volume and rebound.
  • Tightening spring tension so much that your foot tires within a few songs.
  • Skipping the balance check, leaving one pedal faster than the other.
  • Forgetting to retighten clamps and bolts after adjustment, which lets settings drift.

A basic hex key set makes it easy to reach every adjustment point on most double pedals. View on Amazon

Painter’s tape helps you mark original positions and keep track of changes during setup. View on Amazon

FAQ

How often should I adjust my double bass pedal?

Check your settings every few weeks or whenever you change shoes, throne height or playing style. Hardware can loosen over time, so a quick check helps keep the feel consistent.

What is the best beater height for double pedals?

Many players start with the beater about 1 to 2 inches above the head at rest. Fine-tune from there based on speed, power and comfort.

Why does one of my double pedals feel slower?

Uneven spring tension, a tighter chain on one side or a different beater height are the usual causes. Compare both pedals at the same tempo and adjust the slower side until the rebound matches.

Conclusion

Adjusting a double pedal is a matter of setting tension, beater height, footboard angle and cam position, then balancing both sides. Make one change at a time and test at several tempos. If you want more detail on setup and playing, see How to Set Up Double Bass Drum Pedal: A Step-by-Step Guide for Beginners and How to Adjust Double Bass Pedal Tension: 6 Steps for a Faster, Even Feel.

Audrey Hayes

About Audrey Hayes

Audrey Hayes is part of our editorial team and reviews and edits our drums guides, checking product details against manufacturer specifications and owner feedback.

About the author

Audrey Hayes
Audrey Hayes

Audrey Hayes writes reviews and buying guides for Drum Path.