YouTube Setting Up Double Bass Pedal: A Step-by-Step Guide for Drummers
Learn how to set up a double bass pedal from YouTube-style tutorials step by step: positioning, footboard angle, beater height and spring tension for a comforta
Updated November 2026
Setting up a double bass pedal is mostly about positioning. Once the two footboards, the throne and the bass drum sit in the right places, you can tune the spring tension and beater angle to match your foot speed. This guide walks through that process in the order most drummers find easiest, and it points you to related setup articles if you want more detail on a specific model.
Many people search for a youtube setting up double bass pedal video because watching someone adjust the hardware makes the steps clearer. Use the steps below as a checklist while you watch, so you know what to change and why.
Shopping for one? See our guide: 5 Best Electronic Drum Double Bass Pedal Options for Practice and Gigging (2026).
Before You Start: Tools and Preparation
Gather the basics before you touch the hardware. Most adjustments need only a few common tools, and having them ready keeps you from loosening something you meant to leave alone.
- Allen (hex) keys in the sizes your pedal uses, usually 4 mm, 5 mm and 6 mm
- A tape measure or ruler
- Your throne at the height you normally play
- A marker or piece of tape to note original positions
Step 1: Position the Bass Drum and Throne
Set the bass drum first, because everything else depends on it. Place the drum so the batter head is at a comfortable distance from your seat, with your knee slightly bent when your foot rests on the footboard. The drum should sit on its spurs or a rug so it does not creep forward while you play.
Next, set the throne height so your thighs sit roughly level or slightly angled down. Your knees should not be locked straight when your heels are on the floor.
Step 2: Place the Two Footboards
With a double pedal, the second footboard usually sits on the left side of the first. Align the footboards so both sit flat and the pedal chain or linkage runs straight. Many drummers keep the pedals roughly parallel to the bass drum shell, which keeps the beaters striking the head square.
Check the spacing between the two pedals. If your heel or ankle touches the second board while you play the first, move the second pedal slightly outward. Test by sitting in position and tapping slowly before tightening anything.
Step 3: Set Beater Height, Angle and Spring Tension
The beater should strike the batter head near its center. Adjust the beater height so the striking surface sits roughly 1 to 2 inches from the head at rest. This gives enough room for a full stroke without the beater bouncing off the head.
Next, set the spring tension. Tighter tension returns the beater faster but takes more effort, while looser tension feels lighter but can feel slow at high speed. Start in the middle of the range, play some slow strokes and then some fast ones, and adjust in small increments. Many manufacturers specify separate tension and cam settings, so check the manual for your model.
Setting the Footboard Angle
Adjust the footboard angle so your heel rests comfortably and your ankle moves without strain. A slightly lower heel often gives more control for rapid playing, while a higher heel can suit heel-up styles. Lock the angle once it feels natural.
Common Mistakes
- Setting the throne too high, which tightens the hamstrings and limits speed
- Letting the second pedal chain rub or twist against the first pedal
- Over-tightening the spring tension before you have tested the feel
- Forgetting to recheck settings after the drum moves during a session
- Skipping the slow-tempo test, which hides beater alignment problems
Recommended Gear
A stable drum rug keeps the bass drum from sliding as you adjust and play. Look for a non-slip option sized to your kick.
A pedal mat or footboard felt can reduce noise and keep the footboard from slipping. It is a simple add-on that helps during fast passages.
A basic hex key set covers almost every adjustment on a double bass pedal, so keeping one at your kit saves time during setup.
If you want model-specific instructions, the Setting Up a Double Bass Pedal: A Step-by-Step Guide for Beginners article covers the general process in more depth. Drummers working with a particular brand may also find DW Double Bass Pedal: How to Choose, Set Up and Tune Yours useful, and How to Set Up Double Bass Pedal with Hi-Hat: A Step-by-Step Guide helps if your hi-hat sits close to the pedals.
FAQ
How long does it take to set up a double bass pedal?
Most drummers finish a first setup in 20 to 40 minutes, including testing. Later adjustments usually take only a few minutes once you know your preferred positions.
Should the two footboards be exactly parallel?
Roughly parallel works for most players, but slight angle differences are common and comfortable. Choose whatever lets both feet move without interfering with each other.
How do I know if my spring tension is right?
The tension is right when the beater returns quickly after a stroke without bouncing off the head. If your foot tires quickly or the beater feels sluggish, adjust in small steps and retest.
Conclusion
A well-set double bass pedal starts with the drum and throne, then moves to footboard placement, beater height and spring tension. Test at slow and fast tempos after each change, and make only small adjustments at a time. Once the setup feels natural, write down your measurements so you can return to them quickly.
Ready to choose one?
