Diy Double Bass Pedal: 5 Best Picks and Buyer’s Guide (2026)

Updated November 2026

If you want a double bass setup but don’t want to pay for a complete pedal, a diy double bass pedal approach can be a practical route. Some drummers build a second beater from a drive shaft and connector arm, while others buy a finished double pedal and set it up themselves. This guide compares five products that fit different needs, from a full-size double pedal to a replacement drive shaft and a single-chain unit. We judged each one on the criteria that matter most in practice: build quality, how it fits common kick drum hardware, the type of drive system, owner feedback patterns and how well it suits beginners versus gigging drummers.

How we chose: we looked at manufacturer specifications, brand reputation for pedal hardware, and recurring themes in owner feedback about pedal feel, chain noise, footboard comfort and setup difficulty. None of these picks were tested in a lab by us, so treat the notes below as a research-based comparison rather than hands-on results.

Our Top Picks

Product	Best for	Key feature
DW 2000 Series Double Bass Pedal	Drummers wanting a dependable full double pedal	Dual-pedal design with a established pedigree
Colaxi 31cm Steel Double Drum Drive Shaft Pedal Driveshaft Rod	DIY builders adding a second beater	31cm steel drive shaft and connector arm
Double Bass Drum Pedals Double Drum Pedal for Drum Set Kit and Electronic Drums	Budget-minded beginners	Single-chain double pedal setup
DW 3000 Series Double Bass Drum Pedal (DWCP3002A)	Gigging drummers who play hard	Heavier-duty 3000 Series build
TUOREN Double Kick Drum Pedal Drive Shaft Steel Bass Drum Pedal Linkage Connector Arm	Replacing a worn or bent linkage	Steel drive shaft and linkage arm

DW 2000 Series Double Bass Pedal

Best for: Drummers who want a complete, factory-built double pedal from a well-known brand.

This is a good starting point for someone moving from a single pedal to a double setup. It is built as a finished unit, so there is no fabrication involved, and it fits the broad range of drummers who want predictable behavior out of the box.

Key specs:

• Dual-pedal, factory-assembled double bass pedal
• DW 2000 Series hardware line

Pros:

• Brand reputation for consistent hardware and feel
• Ready to mount without custom fabrication
• Widely documented setup procedures

Cons:

• Costs more than a DIY drive shaft approach
• Full pedal may be more than a casual player needs

Bottom line: A strong pick for drummers who want a reliable, finished double pedal and are willing to invest in a known brand.

View on Amazon

Colaxi 31cm Steel Double Drum Drive Shaft Pedal Driveshaft Rod

Best for: DIY builders who already own a pedal and want to add a second beater.

This is a component, not a complete pedal. It suits drummers comfortable with basic hardware work who want to convert a single pedal into a double setup by adding a 31cm steel drive shaft and connector arm.

Key specs:

• 31cm steel drive shaft
• Connector arm for a second beater

Pros:

• Low-cost route to a double setup
• Steel construction for a solid feel
• Useful for experimenting before committing to a full pedal

Cons:

• Requires fitting and alignment skills
• Not a complete pedal, so you need a compatible base unit

Bottom line: The right choice for a hands-on drummer who wants to build a double pedal from parts.

View on Amazon

Double Bass Drum Pedals Double Drum Pedal for Drum Set Kit and Electronic Drums

Best for: Budget-minded beginners and players with electronic kits.

This single-chain double pedal is aimed at players who want a complete setup for a standard drum set or an electronic kit without spending heavily. It is a sensible entry point for learning double-bass technique.

Key specs:

• Double pedal configuration
• Single-chain drive system

Pros:

• Budget-friendly complete double pedal
• Works with acoustic and electronic kits
• Single chain keeps the setup simple

Cons:

• Budget builds often feel less refined than premium pedals
• Chain tension will need regular checking

Bottom line: A practical choice for beginners who want to learn double bass without a large outlay.

View on Amazon

DW 3000 Series Double Bass Drum Pedal (DWCP3002A)

Best for: Gigging drummers who need a sturdier double pedal for heavy or fast playing.

The 3000 Series sits in the brand’s heavier-duty range. It is aimed at drummers who play loud, fast or long sets and want hardware that holds up to repeated use.

Key specs:

• DW 3000 Series double bass pedal
• Model number DWCP3002A

Pros:

• Built for demanding playing
• Brand support and widely available parts
• Consistent feel for double-bass technique

Cons:

• Heavier pedals can feel bulky for small-stage use
• Higher investment than entry-level options

Bottom line: Best suited to working drummers who want a durable double pedal they can rely on night after night.

View on Amazon

TUOREN Double Kick Drum Pedal Drive Shaft Steel Bass Drum Pedal Linkage Connector Arm

Best for: Drummers replacing a worn or damaged linkage on an existing double setup.

This is a replacement part rather than a full pedal. It fits drummers who already have a double pedal and need a new drive shaft or connector arm.

Key specs:

• Steel drive shaft
• Linkage connector arm

Pros:

• Inexpensive way to fix a worn linkage
• Steel construction for durability
• Useful for both repairs and DIY builds

Cons:

• Fit depends on your existing pedal, so check compatibility
• Requires basic tools and alignment care

Bottom line: A useful spare part for maintaining a double setup or building one from components.

View on Amazon

Buying Guide

Full pedal versus drive shaft kit

Decide first whether you need a complete double pedal or a set of components. A complete pedal is ready to use and simpler to mount. A drive shaft kit lets you convert a single pedal, but it demands accurate alignment. Owners often report that DIY conversions take longer than expected, especially when matching beater height and angle.

Good picks for this: DW 2000 Series Double Bass Pedal, Colaxi 31cm Steel Double Drum Drive Shaft Pedal Driveshaft Rod

Drive system: single chain versus other designs

Double pedals use different linkage approaches. Single-chain designs are common in budget and mid-range units because they are simpler to set up. Check how the chain is tensioned and whether you can adjust it without special tools. Chain noise and slack are recurring points in owner feedback, so plan for periodic maintenance.

Good picks for this: Double Bass Drum Pedals Double Drum Pedal for Drum Set Kit and Electronic Drums

Compatibility with your kick drum and hardware

Before buying, measure your kick drum hoop and check how your current bass drum pedal mounts. Many double pedals clamp to the hoop, while some require a specific mounting plate or clamp type. Confirm your hoop thickness and whether you have a single or double-braced hoop.

Good picks for this: DW 3000 Series Double Bass Drum Pedal (DWCP3002A), DW 2000 Series Double Bass Pedal

Footboard and beater feel

The footboard and beater determine how the pedal feels under your foot. Look for a footboard size and shape that matches your foot length and playing style. Heavier-duty pedals usually have firmer springs and a more substantial feel, which some drummers prefer for fast playing.

Good picks for this: DW 3000 Series Double Bass Drum Pedal (DWCP3002A)

Durability and materials

Steel drive shafts and linkage arms are common in replacement parts and generally hold up well to repeated use. Inspect welds, threads and bearings regularly. Owners frequently report that a worn connector arm causes uneven beater strikes, so replacing it early can improve consistency.

Good picks for this: TUOREN Double Kick Drum Pedal Drive Shaft Steel Bass Drum Pedal Linkage Connector Arm, Colaxi 31cm Steel Double Drum Drive Shaft Pedal Driveshaft Rod

Use case: practice, recording or gigging

A practice pedal can be lighter and cheaper, while a gigging pedal should withstand transport and heavy use. If you record, consistent beater response matters more than raw power. Match the pedal to where you play most often.

Good picks for this: Double Bass Drum Pedals Double Drum Pedal for Drum Set Kit and Electronic Drums, DW 3000 Series Double Bass Drum Pedal (DWCP3002A)

Care and maintenance

Keep hardware clean, lubricate moving joints as the manufacturer recommends, and check bolts and clamps after each session. Adjust chain or cable tension so the beaters return cleanly. Regular inspection prevents most failures.

Good picks for this: DW 2000 Series Double Bass Pedal, TUOREN Double Kick Drum Pedal Drive Shaft Steel Bass Drum Pedal Linkage Connector Arm

FAQ

What does a diy double bass pedal involve?

A DIY approach usually means adding a second beater to an existing pedal using a drive shaft and connector arm, or assembling a double setup from parts. It requires careful measurement and alignment so both beaters strike cleanly.

Is a DIY double pedal as reliable as a factory unit?

It can be, if the parts are sound and the setup is accurate. Factory units are designed as complete systems, so they often feel more consistent. A DIY build depends heavily on the quality of your fitting work.

Do I need special tools to set up a double pedal?

Most setups need basic hand tools, typically a hex key or wrench set and a screwdriver. Some clamps and linkages may require specific sizes, so check the instructions before you start.

Can I use a double pedal on an electronic drum kit?

Many double pedals work with electronic kits, but compatibility depends on the kick trigger or pad mounting. Confirm that the pedal fits your kit’s hardware and that your trigger setup can handle the double strike.

How often should I check my double pedal?

Check bolts, clamps and chain or cable tension before every session if you gig, and at least weekly if you practice daily. Replace worn parts as soon as you notice play, uneven strikes or unusual noise.

Can a beginner learn double bass on a budget pedal?

Yes. A simple, well-adjusted double pedal is enough to learn the basic technique. As your playing advances, you can upgrade to a pedal with a more refined feel.

Conclusion

For most drummers, a complete double pedal from a known brand is the simplest path. The DW 2000 Series suits a reliable, finished setup, while the DW 3000 Series is better for heavy gigging. If you enjoy building and already own a pedal, the Colaxi drive shaft offers a low-cost way to add a second beater. Beginners on a tight budget may prefer the single-chain double pedal, and the TUOREN connector arm is a practical replacement for a worn linkage. Match your choice to your skill level, your hardware and how you play, and check compatibility before you buy.

Sources

• Consumer safety guidance on securing and maintaining equipment at home and on stage (cpsc.gov)
• General workplace guidance on tool use and safe equipment handling (osha.gov)

Related reading

• Pearl P532 Double Bass Drum Pedal: Setup, Adjustment and Buying Tips
• Pearl Drum Double Bass Pedal: A Buyer's and Setup Guide
• Pearl Double Bass Pedal: Setup, Choice and Tips for Drummers
• Left Handed Double Bass Pedal: 5 Best Picks for Lefty Drummers (2026)

About the author