Can You Use Double Bass Pedal Electronic Drums? A Practical Answer
Can you use double bass pedal electronic drums? Learn which trigger pads and kick pedals work, what to check before buying, and how to set one up.
Updated November 2026
Yes, you can use a double bass pedal with electronic drums in most cases, but the answer depends on what your kit’s bass drum input accepts. This guide explains how to check your module and kick trigger, which pedal types work, and how to set everything up so both kick hits register cleanly.
Check Your Kit’s Kick Trigger and Input
Electronic kits handle the bass drum differently from acoustic kits. Most use a kick pad or a kick trigger that sends a signal to the drum module when struck. The pedal itself is usually just a beater that hits a rubber or mesh pad, so a double pedal works as long as the kick pad can register rapid repeated strikes.
Shopping for one? See our guide: 5 Best Electronic Drum Double Bass Pedal Options for Practice and Gigging (2026).
Look at the back of your module or the kick pad’s manual for the trigger input. Pay attention to the following:
- Input type: Many kits use a standard trigger jack. Some kick pads are fixed and not designed for a beater-style pedal at all.
- Pad construction: A dedicated kick pad with a rubber head and rebound will handle fast playing better than a thin hi-hat or snare pad repurposed for the kick.
- Module sensitivity settings: The module must be able to read quick repeated triggers without merging them into one hit.
If your kit uses an all-in-one rack or a fixed kick pad at the bottom of the frame, the pedal will strike that pad directly. Check whether the pad sits at a comfortable angle for your beater to make full contact.
Choose a Pedal That Fits Your Kick Pad
A double pedal has two beaters connected by a shared footboard. On an electronic kit, the pedal’s job is to deliver consistent strikes to the pad. Pedals are designed for acoustic heads, so you will need to adjust the setup to avoid damaging the pad or the pedal’s hardware.
Consider these points when selecting a pedal:
- Confirm the pedal’s footboard and beater height suit your kick pad’s position.
- Choose a beater with a felt or plastic head rather than a hard metal one, which can wear out a mesh or rubber pad faster.
- Test the pedal with the pad’s sensitivity turned to a moderate setting before adjusting higher.
Some drummers prefer a dedicated electronic pedal with a softer beater. Others use a standard double pedal with a felt beater to keep the feel close to an acoustic kit. Either approach works if the pad can handle the rebound.
Set Up the Pedal and Module for Clean Double Strikes
Once the physical setup is right, tune the module so both kicks register. Start with the following steps:
- Position the kick pad so the beater hits near its center.
- Adjust the pedal’s spring tension and footboard angle until the strokes feel even.
- Set the kick pad’s sensitivity and threshold in the module so single taps trigger reliably.
- Play fast double strokes at a slow tempo, then increase speed while watching the module display for missed triggers.
- Lower the retrigger or mask time if the module double-counts strokes. Raise it if rapid playing produces ghost notes.
If your module offers velocity curves for the kick, experiment with a linear curve first. It makes dynamic control easier to judge while you dial in the double pedal.
Common Mistakes to Avoid
- Using a hard metal beater on a mesh or rubber kick pad, which causes faster wear.
- Setting sensitivity too high, leading to false triggers from the pedal’s own movement.
- Ignoring retrigger settings, which can make fast playing sound like flams or missed notes.
- Mounting the kick pad at an angle that limits full beater contact.
- Assuming every electronic kit accepts a double pedal without checking the manual first.
Recommended Gear
A double pedal built for electronic use can reduce wear on the kick pad. Look for models with adjustable footboards and felt beaters to protect the pad surface.
- A dedicated electronic kick pedal, which suits kits with a fixed kick pad and gives a consistent strike. View on Amazon
- A felt-beater replacement set, which reduces impact on mesh and rubber pads. View on Amazon
For more buying options, see 6 Best Electronic Drum Set Double Bass Pedals (2026): Our Picks and Electric Drum Set with Double Bass Pedal: Can You Use One?.
FAQ
Will a double pedal damage my electronic drum pad?
It can if the beater is too hard or the pad is thin. Felt or soft plastic beaters and a dedicated kick pad reduce the risk of wear.
Do I need a special module to use a double pedal?
Not always, but the module must read fast repeated triggers accurately. Check its retrigger settings and the kick input specifications in the manual.
Is a single pedal better for beginners on electronic drums?
A single pedal is easier to control while you build basic technique. Once you are comfortable, a double pedal adds fast kick patterns. If you are still learning the setup, Double Bass Drum Pedal Setup: A Step-by-Step Guide for Beginners covers the basics.
Conclusion
Most electronic kits can handle a double bass pedal if the kick pad and module support rapid triggers. Check your input, choose a pedal with a suitable beater, and tune sensitivity and retrigger settings for clean double strokes. A few adjustments will get you playing fast kick patterns with confidence.
Ready to choose one?
