We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Hi Hat Double Bass Pedal Combo: A Setup Guide for Drummers

Learn how a hi hat double bass pedal combo works, how to place it, and how to set it up so your feet stay fast, even and comfortable.

Updated November 2026

A hi hat double bass pedal combo lets you play hi-hat with one foot while running two kick drums with the other, or with both feet on the kick. This guide walks you through what the combo is, how to place and set it up, and the mistakes that most often slow beginners down. Once you finish, you should have a stable, repeatable setup you can build speed on.

What a Hi Hat Double Bass Pedal Combo Actually Is

A hi hat double bass pedal combo is a hi-hat stand and a double bass drum pedal set up so the two work together. Many drummers use the term hi-hat/double bass pedal combo to describe any arrangement where the left foot controls the hats and the right foot handles the kick, with a second beater on the kick or a double pedal below it. For a basic definition of the pedal itself, see What Is a Double Bass Pedal? A Definition for Drummers.

Shopping for one? See our guide: 5 Best Electronic Drum Double Bass Pedal Options for Practice and Gigging (2026).

The key point is that the hi-hat and the bass pedals share your foot space. Their positions, heights and angles decide whether your feet can move freely or whether they collide.

Step 1: Place the Hi-Hat and Pedals

Start with the hi-hat stand, because it sets the reference point for everything else. Most drummers position the hat so the top cymbal sits at a comfortable height for the left hand, and the hi-hat pedal sits where the left foot rests naturally without stretching.

Then position the bass pedal. Decide whether the hi-hat sits inside or outside the kick pedal line, since this affects how your feet cross. The trade-offs are covered in Double Bass Pedal Inside or Outside Hi Hat? Placement Guide, and the broader positioning steps are in How to Position Double Bass Pedal with Hi Hat: A Step-by-Step Guide.

  • Set the hi-hat cymbal height so your left stick can reach the edge comfortably.
  • Keep the hi-hat pedal under the left foot, not pushed far to the side.
  • Angle the bass pedal so your right heel can rest on the pedal board.
  • Leave enough clearance that neither foot touches the other pedal when you lift it.

Step 2: Adjust Pedal Tension and Beater Height

Once your feet have space, set the kick pedal tension. Start with a lighter spring than you think you need and increase it gradually. A spring that is too stiff causes fatigue, while one that is too loose makes the beater bounce back unevenly.

Set the beater height so it rests about a quarter inch to a half inch from the batter head when relaxed. Manufacturers typically specify a range like this, but your exact setting depends on the pedal and the head. If the beater sits too close, notes will choke; too far, and you lose speed.

Step 3: Check Foot Coordination at Slow Tempo

Test the setup slowly before you push speed. Play a simple pattern, such as eighth notes on the hats with kick on beats one and three, at around 80 beats per minute. Listen for uneven kick notes and watch for your foot catching the hi-hat pedal.

  1. Play hats with the left foot and kick with the right at a slow tempo.
  2. Add a second kick stroke and keep the hat pattern steady.
  3. Increase the tempo in 5 bpm steps, stopping whenever the pattern breaks.
  4. Re-check spacing and tension if you can’t hold a stable pattern.

For speed-focused adjustments once the basics feel solid, see Pedal Settings for Fast Double Bass: 6 Adjustments for Faster Feet.

A stable pedal board keeps the setup from shifting while you play, which matters more when two feet share the same space. View on Amazon

A practice pad lets you work on foot-and-hand timing away from the full kit. View on Amazon

A throne at the right height keeps your hips level so your heels can sit naturally on the pedal board. View on Amazon

Common Mistakes to Avoid

  • Placing the hi-hat pedal too far out, which forces your left foot to reach.
  • Setting spring tension too tight, which tires your calves within minutes.
  • Skipping slow practice and jumping straight to fast tempos.
  • Ignoring beater height, which causes uneven kick response.
  • Failing to re-check the setup after moving the kit or changing pedals.

FAQ

Is a hi hat double bass pedal combo harder to learn than a single kick?

Yes, at first, because your feet have to coordinate two different jobs. Slow, steady practice with a simple pattern usually makes the coordination feel natural within a few weeks of regular work.

Should the hi-hat pedal go inside or outside the kick pedal?

Either can work. The choice depends on your leg position and how your feet cross, so test both placements at slow tempo before deciding.

How do I know if my bass pedal tension is right?

The beater should return quickly without bouncing, and your foot should not feel fatigued after a short session. If either happens, loosen the spring a little and retest.

Conclusion

A well-placed hi hat double bass pedal combo comes down to clear spacing, sensible tension and slow, patient practice. Set the hats first, then the kick, and build tempo in small steps. With that foundation, your feet can handle more complex patterns without fighting the hardware.

Audrey Hayes

About Audrey Hayes

Audrey Hayes is part of our editorial team and reviews and edits our drums guides, checking product details against manufacturer specifications and owner feedback.

About the author

Audrey Hayes
Audrey Hayes

Audrey Hayes writes reviews and buying guides for Drum Path.