We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

How to Adjust PDP Double Bass Pedal: 6 Steps for a Smooth, Even Feel

Learn how to adjust PDP double bass pedal settings, including spring tension, beater height and footboard angle, for faster, even double strokes.

Updated November 2026

To adjust a PDP double bass pedal, you set the spring tension, beater height, footboard angle and cam position so the pedal returns quickly without feeling stiff or sloppy. Most adjustments take about 15 minutes with a basic hex key. Once you finish, you should be able to play single and double strokes at your target tempo with a consistent rebound.

What You Need Before You Start

  • The hex key or wrench that came with your pedal (PDP pedals typically use standard hex sizes)
  • A practice pad or a drum with the bass drum fully set up
  • A metronome set to a tempo you can play comfortably
  • A pencil or piece of tape to mark your starting settings

How to Adjust PDP Double Bass Pedal Settings Step by Step

Step 1: Set the Spring Tension

Start with the spring tension, since it affects everything else. Tightening the tension increases rebound and speed but makes the pedal harder to press. Loosening it does the opposite. Adjust in small increments, then press the pedal several times to check the response before making another change.

Shopping for one? See our guide: 5 Best Electronic Drum Double Bass Pedal Options for Practice and Gigging (2026).

Step 2: Set the Beater Height

Next, adjust the beater so it sits about 1 to 2 inches from the batter head at rest, depending on your playing style. A closer beater gives faster response for double strokes. A farther beater produces more power on single strokes. Your beater should never rest against the head, since that deadens the sound and can wear the head faster.

Step 3: Adjust the Footboard Angle

The footboard angle changes how your foot sits and how much leverage you get. Many drummers prefer the footboard slightly tilted toward the drum. Experiment until your heel rests comfortably and your ankle stays relaxed through the stroke.

Step 4: Set the Cam Position

The cam controls the stroke’s acceleration curve. A round cam feels smooth and even. A more aggressive cam gives a punchier attack but can feel uneven if you are still developing control. Start with the default cam, and change it only after you are comfortable with the other settings.

How to Test and Fine-Tune Your Settings

Play a slow single-stroke roll at 80 BPM, then move to double strokes at 120 BPM. Listen for uneven sounds between the two strokes, which usually signals a beater that is too far from the head or spring tension that is too loose. Make one change at a time so you know which adjustment made the difference.

Symptom Likely Adjustment
Pedal feels slow to return Increase spring tension slightly
Double strokes sound uneven Move beater closer to the head
Ankle fatigues quickly Adjust footboard angle
Stroke feels too stiff Loosen spring tension

Common Mistakes to Avoid

  • Tightening the spring tension all the way to maximize speed, which often causes fatigue and loss of control
  • Letting the beater touch the head at rest
  • Changing several settings at once, which makes it hard to tell what helped
  • Ignoring the footboard angle, which can cause ankle strain over long sessions
  • Skipping a final check on the hardware, since loose clamps can shift the pedal during play

A sturdy bass drum pedal spring replacement can help if your current spring no longer returns the beater cleanly. View on Amazon

A practice pad with a rubber surface lets you test pedal changes without a full kit. View on Amazon

If you are also setting up the pedal in a new position, check How to Set Up Double Bass Pedal: A Step-by-Step Guide for Beginners for placement tips. For keeping the pedal from creeping across the floor during play, see How to Stop Double Bass Pedal from Moving: 6 Fixes That Work. Drummers working on speed will also find How to Play Double Bass Pedal Fast: 6 Steps to Faster Feet useful once the pedal feels right.

FAQ

How often should I adjust my PDP double bass pedal?

Check your settings every few weeks, or whenever the feel changes. Hardware can loosen over time, especially with frequent gigging or transport.

Why does my PDP pedal feel different on each side?

Each side has its own beater and spring setup, so small differences in height or tension are common. Match the two beaters’ height and tension to get an even feel.

Can I adjust the pedal without tools?

Some adjustments, such as the footboard angle, may be made by hand after loosening the clamp. Spring tension and beater height usually require the included hex key.

Conclusion

Adjusting a PDP double bass pedal comes down to balancing spring tension, beater height, footboard angle and cam position. Make small changes, test at several tempos, and record what works. With a consistent setup, your double strokes will feel more even and your feet will tire less during long sessions.

Audrey Hayes

About Audrey Hayes

Audrey Hayes is part of our editorial team and reviews and edits our drums guides, checking product details against manufacturer specifications and owner feedback.

About the author

Audrey Hayes
Audrey Hayes

Audrey Hayes writes reviews and buying guides for Drum Path.