How to Play Double Bass with One Pedal: 5 Steps for Clean Doubles
Learn how to play double bass with one pedal using heel-toe technique, foot placement and simple drills that build speed and control for beginners.
Updated November 2026
Playing double bass with one pedal means using a single kick pedal to strike the bass drum twice in quick succession, usually with alternating feet or a single foot doing both strokes. With the right foot position, a relaxed heel-toe motion and a few focused drills, you can produce clean doubles at moderate tempos. This guide shows you how to set up, what motion to use, and how to build control before you chase speed.
Set Up Your Pedal for Doubles
Doubles on one pedal depend on how quickly the beater returns after each stroke. Start by checking the pedal’s spring tension: a lighter spring returns faster but feels less controlled, while a heavier spring gives more power and slower rebound. Many players set the spring so the beater rests about 1 to 2 inches from the head at rest, which leaves room for a quick second stroke without excess travel.
Shopping for one? See our guide: Double Bass with One Pedal: 7 Best Picks Compared.
Position the pedal so your heel rests on the footboard with your ankle at roughly a 90-degree angle. Your knee should sit slightly above the pedal’s footboard, not pushed far forward. If you are unsure whether your current setup suits this technique, the guide How to Position Double Bass Pedal: Setup Steps for Comfortable Playing covers angles and distances in detail.
Learn the Heel-Toe Motion
The core of single-pedal doubles is the heel-toe motion. Press the pedal with the ball of your foot to make the first stroke, then let your heel lift and drop to trigger the second stroke as the beater rebounds. The motion should come from the ankle and lower leg, not the whole leg.
- Rest your foot on the pedal with the beater just off the head.
- Push forward with the ball of your foot for the first stroke.
- Let the beater bounce back, then shift weight to your heel and push again.
- Keep the motion small. Large movements slow you down and tire your ankle.
- Repeat slowly at around 60 BPM, counting “one-and” on each double.
For a broader view of single-foot technique, the article How to Use Double Bass Pedal: A Step-by-Step Guide for Beginners explains foot control in more depth.
Build Speed with a Metronome
Speed comes from repetition at a controlled tempo, not from forcing the motion. Set a metronome and increase the BPM by 4 to 5 at a time only after you play ten clean bars without rushing or dragging. Keep the sound even: both strokes should match in volume.
| Stage | Tempo (BPM) | Goal |
|---|---|---|
| Foundation | 60–80 | Even strokes, relaxed ankle |
| Development | 90–110 | Consistent rebound |
| Application | 120+ | Clean doubles in groove |
If you want a structured speed plan, the guide How to Play Double Bass Pedal Fast: 6 Steps to Faster Feet offers drills that pair well with this approach.
Practice Drills for Single-Pedal Doubles
Use short, repeatable drills rather than long unfocused sessions. Practicing 10 to 15 minutes a day, several days a week, usually produces better results than one long weekend session.
- Single strokes: Play quarter notes at 80 BPM, then switch to eighth notes.
- Doubles in groups of four: Play four double strokes, then rest for one beat.
- Accent shifts: Accent the first stroke of each double, then the second, to build evenness.
- Pad work: Practice on a bass drum pad or the pedal alone, away from the kit, to isolate the motion.
Common Mistakes
- Using the whole leg instead of the ankle, which causes fatigue within minutes.
- Setting the beater too far from the head, which delays the second stroke.
- Rushing tempo before the motion feels automatic.
- Pressing too hard, which reduces rebound instead of adding volume.
- Skipping rest days, which can lead to ankle or shin strain.
Recommended Gear
- Practice pedal pad: A rubber or foam practice pad lets you drill the motion without disturbing others, and it is useful for building heel-toe habits away from the kit. View on Amazon
- Metronome: A reliable metronome keeps your tempo steps honest and prevents rushing during speed work. View on Amazon
FAQ
Can I play double bass with one pedal on any kit?
Yes, any single bass drum pedal can produce doubles with the heel-toe method. Results depend more on spring tension, beater placement and footwork than on the brand.
How long does it take to get clean doubles?
Many players see steady progress within a few weeks of daily 10 to 15 minute sessions. Timelines vary with practice consistency and prior experience.
Does playing doubles on one pedal hurt the ankle?
Overuse can cause strain, so keep motions small, warm up first and rest when you feel soreness. If pain persists, consult a medical professional or physical therapist.
Conclusion
Playing double bass with one pedal comes down to a sound setup, a small heel-toe motion and steady tempo work. Start slowly, focus on even strokes, and increase speed only when your control holds. Consistent short sessions will take you further than rushed practice.
Related reading
- How to Play Double Bass Drum Pedal: A Step-by-Step Guide for Beginners
- Double Double Bass Pedal: How It Works and How to Set One Up
- Double Bass Pedal Longboard: How It Works and How to Set One Up
- Tama Double Bass Pedal Guide: Choosing and Setting One Up
- Lars Ulrich Double Bass Pedal: What He Uses and How to Get His Feel
Ready to choose one?
