Ian Paice Drum Heads: What He Uses and How to Get His Sound
Learn which ian paice drum heads style setups match his Deep Purple sound, how to tune for that punchy, controlled tone, and how to get close at home.
Updated November 2026
Ian Paice drum heads are a popular topic among drummers who want the tight, punchy, articulate sound he built across decades with Deep Purple and beyond. This guide explains the general head characteristics that shape his sound, how to set up a similar kit, and how to tune for it. Paice’s exact specific setups have shifted over the years, so treat this as a starting framework rather than a verified parts list.
Understand the Sound You Are Chasing
Paice is known for a crisp attack, a controlled low end, and toms that sing without ringing out of control. Those qualities come from a combination of head thickness, coating, and tuning rather than any single magic product. Before you buy anything, decide which of these traits matters most to you: attack, sustain, or warmth.
Shopping for one? See our guide: Remo Drum Heads Ambassador: 5 Best Picks for Every Drummer (2026).
Choose Heads With the Right Construction
Most drummers chasing this style start with single-ply or two-ply coated batter heads on the toms and a clear or lightly textured resonant head underneath. Thinner batters respond quickly and give you articulation, while a resonant head controls overtones. For the bass drum, many players use a reinforced or porthole-style batter for focus, paired with a resonant head that gives some air without flubbing the low end.
Tune for Attack and Control
Tuning does more to shape the sound than the brand on the head. Follow these steps to get started:
- Install the batter and resonant heads, seating each hoop evenly.
- Tighten each tension rod by hand until the hoop sits flat with no wrinkles.
- Using a drum key, bring every lug up one quarter turn at a time in a star pattern.
- Tap about one inch from the edge and compare each lug. Aim for matching pitch around the head.
- Tune the resonant head slightly higher than the batter for a clearer, more focused tone.
- Play at practice volume and adjust until the attack feels immediate but the note decays cleanly.
Adjust for Your Kit and Room
Tom tuning depends on size. A 12-inch tom often sits higher than a 16-inch floor tom, so use the same relative approach across the kit rather than chasing identical pitches. Bass drum tuning should be tight enough to keep the beater attack defined but loose enough to avoid a choked, boxy sound. Check the result in the room where you actually play, since carpet and walls change everything.
| Drum | Batter Focus | Resonant Focus |
|---|---|---|
| Rack toms | Medium-tight for quick attack | Slightly higher for clarity |
| Floor toms | Medium for body | Slightly lower for depth |
| Bass drum | Focused, controlled | Open enough to add air |
Common Mistakes
- Tightening one lug far more than the others, which causes uneven pitch and early head wear.
- Buying heads based on a famous player’s setup without considering your own kit size and shell.
- Skipping the seating step, which makes heads drift out of tune within a session.
- Over-damping every drum, which removes the sustain that gives the sound its character.
- Replacing heads only after they fail rather than checking them for dents and dead spots regularly.
Recommended Gear
A good drum key makes precise lug adjustments much easier and is the most useful tool for this tuning approach. View on Amazon
A tuning gauge or pitch app helps you match lugs and compare drums consistently from session to session. View on Amazon
A set of moongel or similar small dampening pads lets you control unwanted ring without killing the sustain you want. View on Amazon
For more background on how head choices affect your sound, see Coated Drum Heads vs Clear: Which Should You Choose? and Evans vs Remo Drum Heads (2026): Which Is Better for Your Drumming?. If you are working on bass drum sound specifically, Evans Bass Drum Heads: How to Choose, Tune and Care for Yours covers the fundamentals.
FAQ
Do I need the exact same heads to get this sound?
No. Tuning, drum shell construction, and playing technique account for much of the sound. Similar head types will get you most of the way there.
Should I tune toms higher or lower than the bass drum?
There is no fixed rule. Tune for the balance you hear in your room, keeping toms articulate and the bass drum focused rather than boomy.
How often should I replace drum heads?
Replace them when they show visible dents, dead spots, or tuning that will no longer settle evenly. Regular inspection helps you catch wear early.
Conclusion
Ian Paice drum heads are best approached as a sound goal rather than a shopping list. Focus on head type, even tuning, and a resonant head that controls overtones. Experiment within those principles, and you will get closer to that tight, articulate tone than by copying a specific parts list alone.
Related reading
- What Drum Heads Did John Bonham Use: The Heads Behind the Led Zeppelin Sound
- What Are Drum Heads Made Of? Materials Explained for Beginners
- Remo Silentstroke Drum Heads: 6 Best Picks for Quiet Practice (2026)
Ready to choose one?
