We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Matt Garstka Drum Heads: What He Uses and How to Get His Sound

Learn which matt garstka drum heads suit his recorded and live sound, how to pick similar heads, and how to tune them for a tight, musical tone.

Updated November 2026

Matt Garstka is a session and touring drummer known for a crisp, controlled sound with plenty of articulation. If you want to get closer to that tone, the key is understanding the type of heads he favors, how they are tuned, and how the drum is set up. This guide walks through the general head characteristics that shape his sound and gives you a practical way to match it on your own kit.

What Matt Garstka Drum Heads Typically Sound Like

Drummers who study his recordings often describe a dry, focused attack with a short sustain and a clear fundamental pitch. That points toward single-ply or thin two-ply heads with moderate tension rather than thick, heavily dampened coated heads. Public information about his exact head models is limited, so treat any specific brand or model as something to verify with his current endorsements or interviews rather than a confirmed setup.

Shopping for one? See our guide: Remo Drum Heads Ambassador: 5 Best Picks for Every Drummer (2026).

How to Recreate the Sound With Similar Heads

Start by matching the general head category, then fine-tune with tension and dampening. Use this sequence:

  1. Choose a batter head with a thin film and a clean, unbroken surface.
  2. Pick a resonant head that is slightly thinner than your batter, which helps the drum project without excess ring.
  3. Tune both heads to a similar pitch, then bring the batter up a little for more attack.
  4. Check tension at the lugs in a star pattern, turning each rod about a quarter turn at a time.
  5. Adjust dampening last, using a small strip of gel or tape only if the ring is too long.

Tuning Tips for a Tight, Articulate Tone

Tuning does more to shape the sound than the brand name on the head. Aim for even tension across all lugs, which usually means checking each one with a drum key and tapping a few inches from the rim. Many drummers find that a snare or tom tuned slightly higher on the batter than the resonant head gives a crisp stick response. Tune in small increments and listen after each change, since a single full turn can shift pitch more than you expect.

Quick Checklist Before You Record or Gig

  • Confirm both heads are seated evenly on the shell.
  • Check that lugs are snug but not overtightened.
  • Tap test each drum at several points around the head.
  • Record a short take and compare it to the reference you are chasing.

Common Mistakes When Chasing a Specific Drummer’s Sound

  • Buying the exact head model without adjusting tuning, which often leaves the drum sounding different.
  • Overusing dampening, which removes the open character that makes the sound distinctive.
  • Ignoring the shell, since wood and snare construction affect tone as much as the head.
  • Changing several variables at once, which makes it hard to tell what helped.

A quality drum key helps you make small, even tension adjustments across all lugs, which is essential when dialing in a crisp tone. A dedicated drum tuning gauge can also help you match pitch between batter and resonant heads so the drum stays consistent from song to song. View on Amazon View on Amazon

For a broader understanding of head construction, see What Are Drum Heads Made Of? Materials Explained for Beginners and How to Tune Drum Heads: A Step-by-Step Guide for Beginners. If you are comparing head families, Remo Drum Heads Explained: How to Pick, Tune and Care for Yours offers a useful overview.

FAQ

Does Matt Garstka use one specific drum head brand?

Publicly available details about his exact head models are limited, so it is best to check his recent interviews or endorsement listings. Matching the general head type and tuning approach will get you closer than chasing a single model.

Can I get a similar sound with any brand of heads?

Yes, in many cases. Choosing a thin, clean batter and a slightly thinner resonant head, then tuning carefully, can produce a similar character across brands.

Should I replace my heads to match his sound?

Not necessarily. Try tuning your current heads first, since tension and dampening often make the largest difference. Replace them only if they are worn, dented or no longer hold a consistent pitch.

Conclusion

Recreating a drummer’s sound comes down to matching head type, tuning evenly and adjusting dampening sparingly. Use the checklist above as a starting point and make one change at a time. Your drum will sound more like the reference you are chasing, and more like your own kit.

Owen Palmer

About Owen Palmer

Owen Palmer is part of our editorial team and reviews and edits our drums guides, checking product details against manufacturer specifications and owner feedback.

About the author

Owen Palmer
Owen Palmer

Owen Palmer writes reviews and buying guides for Drum Path.