We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Nicko McBrain Drum Heads: What He Used and How to Get His Sound

Learn which nicko mcbrain drum heads shaped Iron Maiden's sound, how to match his tone, and which heads and tuning steps to use on your own kit.

Updated November 2026

Nicko McBrain, the longtime drummer for Iron Maiden, built a powerful, open, and punchy sound that many players try to copy. This guide explains what drum heads are commonly associated with his setup, how to think about his tonal goals, and how to approximate his sound with heads you can buy today. Because exact head choices vary by tour, album, and drum, treat this as a sound-matching roadmap rather than a verified parts list.

What Defines the McBrain Sound

His playing is known for big, sustained toms, a fat kick with enough attack to cut through dense guitar riffs, and a snare that rings clearly without sounding thin. Those traits come from a combination of head thickness, tuning height, and how much the batter heads are allowed to resonate. Before buying anything, decide which of those qualities matters most to you.

Shopping for one? See our guide: Remo Drum Heads Ambassador: 5 Best Picks for Every Drummer (2026).

How to Approximate His Sound on Your Kit

  1. Start with the batter heads. Single-ply or thin two-ply batters give more attack and tone. Heavier batters reduce overtones and give a tighter, more controlled sound.
  2. Choose resonant heads for toms. Clear or lightly coated resonant heads let the drum sing. Pick a size that matches your toms, since a 12-inch and 13-inch tom will respond differently.
  3. Use a kick head with a port or a reinforced batter. A ported front head or a batter with a small felt strip keeps the attack while controlling excess ring.
  4. Pick a snare head that balances crack and body. A coated or lightly ringing head works well for a rock snare with a clear top end.
  5. Tune each drum to a pitch you can hear clearly. Tune the batter and resonant heads close in pitch, then adjust for sustain.

Tuning Steps That Matter Most

Head choice matters less than tuning. Tune opposing lugs evenly, bring the drum up to a clear pitch, then check the overtones by tapping near the rim. Quarter-turn adjustments on each lug are a good starting point. If a tom sounds boxy, loosen the resonant head slightly. If it sounds washy, tighten the batter a little.

Quick Tuning Checklist

  • Seat the heads evenly and tighten by hand until the wrinkles are gone.
  • Tune each lug in a star pattern, one quarter-turn at a time.
  • Check that each drum rings clearly before you play it hard.
  • Let heads settle for a day or two if you changed them, then retune.

Common Mistakes

  • Copying a sound without matching the drum sizes and shells.
  • Over-tightening heads, which can choke the tone and stress the hoop.
  • Ignoring the snare wires and throw-off, which affect the snare sound as much as the head.
  • Expecting one head to deliver the whole sound instead of adjusting the kit as a system.

A reliable drum key helps you make the small, even tuning adjustments this approach depends on. View on Amazon

A snare-specific head with a clear top gives you flexibility to dial in a rock snare tone. View on Amazon

A tuning gauge or pitch app makes it easier to match tom pitches across the kit. View on Amazon

For a broader look at how heads are chosen by drummers in similar genres, see What Drum Heads Did John Bonham Use: The Heads Behind the Led Zeppelin Sound and Rock Band Drum Heads: How to Choose the Right Set for Your Sound. If you want to understand the materials involved, What Are Drum Heads Made Of? Materials Explained for Beginners covers the basics.

FAQ

Did Nicko McBrain use a specific brand of drum heads?

Drummers in his position often change heads over time, and exact models vary by album and tour. Check interviews and gear coverage for the most specific information, since brand details are not always consistent across sources.

Can I get a similar sound with basic heads?

Yes, in most cases. Thin batters, clear resonant heads, and careful tuning get you close to the open, punchy character associated with his playing.

Should I change my kick head to match his sound?

It can help. A ported or reinforced kick batter controls ring while keeping attack, which suits the bass drum tone many fans associate with his style.

Conclusion

Matching a famous drummer’s sound comes down to goals more than gear lists. Focus on batter thickness, resonant head choice, and even tuning, and you can get a sound that captures the spirit of his playing. Adjust one variable at a time so you can hear what each change does.

Owen Palmer

About Owen Palmer

Owen Palmer is part of our editorial team and reviews and edits our drums guides, checking product details against manufacturer specifications and owner feedback.

About the author

Owen Palmer
Owen Palmer

Owen Palmer writes reviews and buying guides for Drum Path.