6 Best DW 9000 Boom Cymbal Stand Options for Every Drummer (2026)

Updated November 2026

Shopping for a dw 9000 boom cymbal stand means choosing between a few closely related designs from the same hardware family, and the differences matter once a cymbal is mounted at the end of an arm. This guide compares six listings from the DW 9000 line, covering straight and low boom arms, a heavier-duty model, and a double tom stand that includes a boom arm. Each pick is judged on boom reach, weight capacity, leg and base stability, clamp and tilt design, and how well it suits a particular kit layout.

Our Top Picks

The table below summarizes how each stand fits common setups. Use it as a starting point, then read the individual sections for the details that affect your choice.

Quick Comparison

Product	Best for	Key feature
DW 9000 Series Straight/Boom Cymbal Stand DWCP9700	Most drummers adding a boom to a standard kit	Straight and boom configuration in one stand
DW DWCP9701 Boom Cymbal Stand	Adding a second cymbal to an existing setup	Dedicated boom arm for a single cymbal
DW 9000X Series Low Boom Cymbal Stand with InnerLock DWCP9701XIL	Low-profile ride and crash placement	Lower boom height with InnerLock tilter
DW 9000 Series Extra-Heavy Duty Boom Stand	Large, heavy cymbals	Reinforced build for added weight
DW Drum Workshop 9000 Series 9500D Hi-Hat Cymbal Stand, 3-Leg	Drummers who want a compact footprint	Three-leg base for stability
Drum Workshop CP9934 9000 Series Double Tom Stand W/934 Cymbal Boom Arm	Kits needing a tom mount and a boom	Double tom stand with integrated boom arm

DW 9000 Series Straight/Boom Cymbal Stand DWCP9700

Best for: Drummers who want one stand that can work as a straight stand or a boom.

This is the most flexible option in the group. Drummers who play mostly standing or who change setups between gigs often prefer a stand that can switch configurations without buying a second piece.

Key specs

• Series: DW 9000 hardware line
• Model: DWCP9700, straight/boom configuration

Pros

• Flexible straight or boom use
• Part of a well-known hardware family that matches other 9000 pieces
• Suits a wide range of cymbal sizes

Cons

• Boom reach is shorter than some dedicated boom arms
• Setup takes more time than a single-purpose stand

Bottom line: The safest pick for drummers who want versatility and a clean match with other DW 9000 hardware.

View on Amazon

DW DWCP9701 Boom Cymbal Stand

Best for: Adding a second cymbal to an existing kit without rebuilding the setup.

A dedicated boom arm is the direct route for drummers who already own their stands and simply need an extra cymbal position over the kit.

Key specs

• Series: DW 9000 hardware line
• Model: DWCP9701 boom configuration

Pros

• Dedicated boom design for a clear, single purpose
• Fits neatly alongside other 9000 stands
• Good for adding a crash or ride over the kit

Cons

• Only one function, so no straight-stand option
• May need careful positioning to avoid crowding the snare or toms

Bottom line: A practical choice for drummers expanding a kit one cymbal at a time.

View on Amazon

DW 9000X Series Low Boom Cymbal Stand with InnerLock DWCP9701XIL

Best for: Low ride and crash positioning where height over the kit is limited.

Low boom arms suit drummers who want a cymbal close to the playing zone, especially in tight rooms or on smaller riser setups.

Key specs

• Series: DW 9000X, low boom design
• Model: DWCP9701XIL with InnerLock system

Pros

• Lower profile keeps the cymbal within easy reach
• InnerLock design helps hold tilt and height settings
• Useful in low-ceiling or compact rooms

Cons

• Less clearance for large cymbals or big sticks
• Low positioning can crowd the snare or hi-hat for some players

Bottom line: Ideal for drummers who prioritize a compact, close-in cymbal position.

View on Amazon

DW 9000 Series Extra-Heavy Duty Boom Stand

Best for: Large or heavy cymbals that need extra support.

Heavier cymbals, especially large rides and thick crashes, put more load on the arm and base. A reinforced stand reduces the chance of drift during fast playing.

Key specs

• Series: DW 9000, extra-heavy duty build

Pros

• Reinforced build for heavier cymbals
• Stable under aggressive playing
• Consistent with other 9000 hardware

Cons

• Heavier to transport than lighter boom stands
• Overbuilt for light cymbals and small kits

Bottom line: Best for drummers running heavy cymbals who need the extra stability.

View on Amazon

DW Drum Workshop 9000 Series 9500D Hi-Hat Cymbal Stand, 3-Leg

Best for: Drummers who want a compact footprint and a three-leg base for stability.

This listing is a hi-hat stand rather than a boom arm, but it is included because many drummers look at it when comparing 9000-series cymbal hardware for small or secondary cymbal positions. Check the listing carefully to confirm it matches your intended use before buying.

Key specs

• Series: DW 9000 Series
• Model: 9500D, three-leg base

Pros

• Three-leg base spreads load for stability
• Compact footprint for tight spaces
• Fits the 9000 family visually and mechanically

Cons

• Not a boom arm, so it will not reach over the kit
• Limited use outside hi-hat or low-position cymbals

Bottom line: A good match for drummers who need a stable, compact stand rather than an overhead boom.

View on Amazon

Drum Workshop CP9934 9000 Series Double Tom Stand W/934 Cymbal Boom Arm

Best for: Kits that need a double tom mount and a cymbal boom in one setup.

Combining a double tom stand with a boom arm can save space and reduce the number of separate stands on a small kit, though the combined footprint should be checked against your room.

Key specs

• Series: DW 9000 Series
• Model: CP9934, double tom stand with 934 boom arm

Pros

• Combines a tom mount and a boom in one piece
• Reduces stand count on compact kits
• Matches the DW 9000 family

Cons

• Heavier and bulkier than a standalone boom
• Less adjustment flexibility for the tom position

Bottom line: Worth considering for drummers who want fewer stands and need both a tom and a boom position.

View on Amazon

Buying Guide

Before choosing a stand, check how it will sit in your actual setup. The factors below cover the most common points where drummers run into trouble.

Boom reach and arm length

Measure the distance from your throne to the spot where you want the cymbal. Many drummers find that a cymbal 2 to 4 inches closer than expected feels more natural, but this depends on arm length and height. Compare the reach of each arm against your measurement.

Good picks for this: DW 9000 Series Straight/Boom Cymbal Stand DWCP9700, DW DWCP9701 Boom Cymbal Stand

Weight capacity and cymbal size

Heavier cymbals add stress to the arm and clamp. Check the manufacturer’s stated load guidance and match it to your largest cymbal. A stand that is overbuilt for light cymbals is rarely a problem, but an underbuilt stand can drift or fail under heavy use.

Good picks for this: DW 9000 Series Extra-Heavy Duty Boom Stand, DW 9000X Series Low Boom Cymbal Stand with InnerLock DWCP9701XIL

Base stability and footprint

Three-leg bases generally spread load more evenly than two-leg designs, which helps on uneven floors or during hard hits. Measure the base footprint against your kit layout so the stand does not crowd the snare, hi-hat or toms.

Good picks for this: DW Drum Workshop 9000 Series 9500D Hi-Hat Cymbal Stand, 3-Leg, Drum Workshop CP9934 9000 Series Double Tom Stand W/934 Cymbal Boom Arm

Height and low-profile positioning

Low boom designs keep the cymbal close to the playing zone and can work well in low-ceiling rooms or on compact risers. Check that the lowest setting still clears your snare and hi-hat when you play at full extension.

Good picks for this: DW 9000X Series Low Boom Cymbal Stand with InnerLock DWCP9701XIL, DW DWCP9701 Boom Cymbal Stand

Tilt, clamp and adjustment

Smooth, reliable tilt and clamp action makes a real difference during setup and mid-song adjustments. Owners frequently mention that stiff or slipping clamps are the most common frustration, so test the feel of the hardware before committing.

Good picks for this: DW 9000X Series Low Boom Cymbal Stand with InnerLock DWCP9701XIL, DW 9000 Series Straight/Boom Cymbal Stand DWCP9700

Durability and care

Hardware that stays in a gig bag or a van takes more abuse than stands kept at home. Keep clamp screws snug, check for loose hardware after each session, and store stands with their arms collapsed to reduce stress on the joints.

Good picks for this: DW 9000 Series Extra-Heavy Duty Boom Stand, DW 9000 Series Straight/Boom Cymbal Stand DWCP9700

FAQ

What is a dw 9000 boom cymbal stand used for?

It holds a cymbal on a horizontal arm that extends over the kit, letting you reach it without moving your throne. Boom stands are common for crashes, rides and extra cymbals placed at specific angles.

Is a straight stand the same as a boom stand?

No. A straight stand has a vertical post and the cymbal sits at the top, while a boom stand has an arm that extends outward. Some models, including the DWCP9700, can be set up in either configuration.

How do I know if a boom arm is long enough?

Measure from your throne to the position where you want the cymbal, then compare that distance to the arm’s stated reach. Dry-fit the stand before the first gig if possible.

Can I use a hi-hat stand as a cymbal boom?

Generally no. Hi-hat stands are designed for a different load and motion, and they lack the arm reach of a boom. The DW 9500D listed above is a hi-hat stand and is best used for that purpose.

How much weight can a boom stand hold?

Check the manufacturer’s stated guidance for each model, since capacity varies by design. Match the stand to your heaviest cymbal and allow some margin for stress during hard playing.

Do I need a low boom or a standard boom?

A low boom suits compact rooms and close-in positioning, while a standard boom gives more height and clearance. Your room height, kit layout and cymbal size should guide the decision.

How do I maintain a boom cymbal stand?

Tighten clamps and joints after sessions, avoid overtightening threads, and wipe down the arm to remove dust that can affect smooth adjustment. Store the stand collapsed when it is not in use.

Conclusion

For most drummers adding a boom to an existing kit, the DW 9000 Series Straight/Boom Cymbal Stand DWCP9700 offers the most flexibility, while the DW DWCP9701 Boom Cymbal Stand is a direct choice for a dedicated boom position. Drummers who need a low, close-in cymbal should consider the DW 9000X Low Boom with InnerLock, and those running heavy cymbals may prefer the Extra-Heavy Duty Boom Stand. The 9500D hi-hat stand and the CP9934 double tom with boom arm each serve narrower but useful roles. Match the stand to your reach, weight and footprint needs before you buy.

Sources

• Workplace safety guidance on securing equipment and reducing trip and load hazards, relevant to stand placement in shared spaces (osha.gov)
• General guidance on hearing protection and safe sound levels for musicians and performers (nps.gov)

Related reading

• 4 Best Cymbal Stands with Boom Arm Picks for Every Drummer (2026)
• Top 5 Hi-Hat Cymbal and Stand Picks for Every Drummer (2026)
• Parts of a Cymbal Stand: 4 Best Cymbal Stand Picks Compared (2026)
• 4 Best Ride Cymbal on Stand Options for Every Drummer (2026)

About the author